Suggest Buy The Round Glass Cutting Machine

  • By:LiaoDa
  • Date:2022/06/24

Introduction 

This blog Is About Round Glass Cutting Machine  1.jpg

Read further to answer questions like:

 

  • What is glass cutting?
  • Glass cutting process
  • Glass cutting machines

  

 

What Is Glass Cutting ?

Round glass cutting is a method of weakening the glass structure along a score line, which can be broken by applying controlled force; this splits the glass into two parts along the score or crack line. Glass cutting is the same regardless of the application, whether for industrial or DIY applications. Variations in this process are related to the size of the glass sheet and its thickness. A fundamental element of glass cutting is the scratch, which is a weak point formed in the glass that can be manipulated lightly. Appropriate cutting grooves allow easy and clean separation of glass sections. After separation, the edges of the glass can be sanded, shaped and smoothed.

     

Glass Cutting Process

The cutting wheel in LiaoDa glass cutting saw machine cuts glass by fractureing the surface and creating a fissure. This fissure is almost invisible and can be seen only by the continuous band of reflected light. The force and speed of the cutting wheel are the two main factors. For example, the maximum speed of a saw should be as high as possible to create a fissure without crushing the surface. If the force applied is too high, the glass will break and a white gritty line will appear. When using a round glass cutting machine, the most important factor to consider is the thickness of the glass. Glass that is thicker requires a heavier cutter. This can help make the cutting process faster and more efficient. A round glass cutter is usually able to cut the glass in a single straight line. Some of these machines have an adjustable width range so you can adjust the length to fit any bottle. Some of them even have a water jet, which is good for cutting thick glass.

  

Semi-automatic Glass Cutting Table YD-XYC-series

Glass Cutting Machine 

LiaoDa Glass cutting machine uses a diamond to make splits, but in most cases they use a cutting wheel made of hardened steel or tungsten carbide. The profile of a cutting wheel is measured in 'hone angle,' the sharper the V, the thicker the glass. The blade of a glass cutting machine can also be used to cut thin pieces. If the cutting wheel is too big, the glass will crack or shatter. The cost of a round glass cutting machine will depend on the amount of work it will be used for. Some are meant for professional glass cutters, while others are meant for weekend hobbyists. Obviously, the type of work and the price will be directly proportional to the level of quality. Professional-quality tools will cost between $100 and $300, and hobbyist models are usually less expensive and smaller. For smaller jobs, the budget-friendly models will probably be much more affordable.

   

The cutting wheel should be large enough to reach the edges of the glass. The cutting wheel should not be thicker than 0.0625 inches to prevent the glass from being damaged during the cutting process. The covering material should be free of burrs, and the cutting surface should be cleaned along the cut line. The wheel of a glass cutting machine should roll easily, evenly, and smoothly. There should be no obstacles that could hinder the cutting wheel's movement. When selecting a round glass cutting machine, keep in mind the size of the workpiece. To increase the accuracy and control of glass cutting, the operator can adjust the size of the glass before use on the machine with a PC computer. A PC software can also help optimize the cutting size and provide data for processing.

   

As professional glass cutting machine manufacturer, we hold the idea that the cutting tool must be adapted to the size of the glass. A cutter that is too heavy to move will be difficult to use. It should also be equipped with a protective cover, ensuring safety. A good quality machine should be ergonomically designed and user-friendly. Once you find the perfect pattern, you can practice cutting scrap pieces to make sure it fits your needs. Then you can use it for commercial purposes. Also, if you have any questions about our products, please feel free to email us at LiaoDa sales@ladglass.com.

INQUIRY

CONTACT US

contact-email
contact-logo

LIAODA (LAD) Glass Machinery Co., Ltd.

We are always providing our customers with reliable products and considerate services.

If you would like to keep touch with us directly, please go to contact us

Contact Us

Follow Us

If you want to learn more about us or our products, please contact us freely with below guidance.

Contact Us
  • Home

    Home

  • Tel

    Tel

  • Email

    Email

  • Share

  • Contact

    Contact